Author: admin_ktg

One of the issues with a Hot-Box is lack of knowing if the heaters are working or not. One of my customers had pipes freeze twice. Each  time it was …

Customer had a legacy work cell that had an Adept Cobra 550 4-axis robot in it. Due to reliability  and maintenance issue with the Cobra 550 robots customer decided to …

Customer had an existing Oil filtration system. Kerr Technology group was able to design and implement a PLC based control that allowed the existing oil filtration system to be integrated …

Customer had a braze furnace with old controls. Kerr Technology Group was able to redesign the entire control system with a PLC. Not only did were we able to control …

Customer wanted to add a light bar safety feature to a machine that was purchased from a foreign seller. Kerr Technology Group was able to design, install, and integrate a …

Customer had a Legacy Variable Frequency Drive that failed. Repair was not possible and  drive was discontinued making replacement impossible. KTG was able to replace the VFD drives with new …

Customer had a Compumotor RP240 that developed a bad display.  A used display was only available on EBay. Customer decided to replace and upgrade electronic control section. Kerr Technology Group …

Just because a machine is old does not mean it’s  not serviceable.  The rate of change of electronics and CNC/PLC technology means machine controls often become outdated faster then the …